# Significant figures

This article needs additional citations for verification. (July 2013) |

Fit approximation |

Concepts |
---|

Orders of approximation Scale analysis · Big O notationCurve fitting · False precisionSignificant figures |

Other fundamentals |

Approximation · Generalization errorTaylor polynomial Scientific modelling |

**Significant figures** (also known as the **significant digits**, *precision* or *resolution*) of a number in positional notation are digits in the number that are reliable and absolutely necessary to indicate the quantity of something. If a number expressing the result of measurement of something (e.g., length, pressure, volume, or mass) has more digits than the digits allowed by the measurement resolution, only the digits allowed by the measurement resolution are reliable and so only these can be significant figures. For example, if a length measurement gives 114.8 mm while the smallest interval between marks on the ruler used in the measurement is 1 mm, then the first three digits (1, 1, and 4, and these show 114 mm) are only reliable so can be significant figures. Among these digits, there is uncertainty in the last digit (8, to add 0.8 mm) but it is also considered as a significant figure^{[1]} since digits that are uncertain but *reliable* are considered significant figures. Another example is a volume measurement of 2.98 L with the uncertainty of ± 0.05 L. The actual volume is somewhere between 2.93 L and 3.03 L. Even if all three digits are not certain (e.g., the actual volume can be 2.94 L but also can be 3.02 L.) but reliable as these indicate to the actual volume with the acceptable uncertainty. So, these are significant figures.^{[2]}

The following digits are not significant figures.^{[3]}

- All leading zeros. For example, 013 kg has two significant figures, 1 and 3, and the leading zero is not significant since it is not necessary to indicate the mass; 013 kg = 13 kg so 0 is not necessary. 0.056 m has two insignificant leading zeros since 0.056 m = 56 mm so the leading zeros are not absolutely necessary to indicate the length.
- Trailing zeros when they are merely placeholders. For example, the trailing zeros in 1500 m as a length measurement are not significant if they are just placeholders for ones and tens places as the measurement resolution is 100 m. In this case, 1500 m means the length to measure is close to 1500 m rather than saying that the length is exactly 1500 m.
- Spurious digits, introduced by calculations resulting in a number with a greater precision than the precision of the used data in the calculations, or in a measurement reported to a greater precision than the measurement resolution.

Of the significant figures in a number, the **most significant** is the digit with the highest exponent value (simply the left-most significant figure), and the **least significant** is the digit with the lowest exponent value (simply the right-most significant figure). For example, in the number "123", the "1" is the most significant figure as it counts hundreds (10^{2}), and "3" is the least significant figure as it counts ones (10^{0}).

Significance arithmetic is a set of approximate rules for roughly maintaining significance throughout a computation. The more sophisticated scientific rules are known as propagation of uncertainty.

Numbers are often rounded to avoid reporting insignificant figures. For example, it would create false precision to express a measurement as 12.34525 kg if the scale was only measured to the nearest gram. In this case, the significant figures are the first 5 digits from the left-most digit (1, 2, 3, 4, and 5), and the number needs to be rounded to the significant figures so that it will be 12.345 kg as the reliable value. Numbers can also be rounded merely for simplicity rather than to indicate a precision of measurement, for example, in order to make the numbers faster to pronounce in news broadcasts.

Radix 10 is assumed in the following.

## Identifying significant figures[edit]

This section needs additional citations for verification. (May 2021) |

### Rules to identify significant figures in a number[edit]

Note that identifying the significant figures in a number requires knowing which digits are reliable (e.g., by knowing the measurement or reporting resolution with which the number is obtained or processed) since only reliable digits can be significant; e.g., 3 and 4 in 0.00234 g are not significant if the measurable smallest weight is 0.001 g.^{[4]}

**Non-zero digits within the given measurement or reporting resolution**are**significant**.- 91 has two significant figures (9 and 1) if they are measurement-allowed digits.
- 123.45 has five significant digits (1, 2, 3, 4 and 5) if they are within the measurement resolution. If the resolution is 0.1, then the last digit 5 is not significant.

**Zeros between two significant non-zero digits**are**significant (**.*significant**trapped zeros)*- 101.12003 consists of eight significant figures if the resolution is to 0.00001.
- 125.340006 has seven significant figures if the resolution is to 0.0001: 1, 2, 5, 3, 4, 0, and 0.

**Zeros to the left of the first non-zero digit**(leading zeros) are.__not__significant- If a length measurement gives 0.052 km, then 0.052 km = 52 m so 5 and 2 are only significant; the leading zeros appear or disappear, depending on which unit is used, so they are not absolutely necessary to indicate the measurement scale.
- 0.00034 has 4 significant zeros if the resolution is 0.001. (3 and 4 are beyond the resolution so are not significant.)

**Zeros to the right of the last non-zero digit (trailing zeros) in a number with the decimal point**are**significant**if they are within the measurement or reporting resolution.- 1.200 has four significant figures (1, 2, 0, and 0) if they are allowed by the measurement resolution.
- 0.0980 has three significant digits (9, 8, and the last zero) if they are within the measurement resolution.
- 120.000 consists of significant figures except for the last zero If the resolution is to 0.01.

**Trailing zeros in an integer****may or may**, depending on the measurement or reporting resolution.__not__be significant- 45,600 has 3, 4 or 5 significant figures depending on how the last zeros are used. For example, if the length of a road is reported as 45600 m without information about the reporting or measurement resolution, then it is not clear if the road length is precisely measured as 45600 m or if it is a rough estimate. If it is the rough estimation, then only the first three non-zero digits are significant since the trailing zeros are neither reliable nor necessary; 45600 m can be expressed as 45.6 km or as 4.56 × 10
^{4}m in scientific notation, and both expressions do not require the trailing zeros.

- 45,600 has 3, 4 or 5 significant figures depending on how the last zeros are used. For example, if the length of a road is reported as 45600 m without information about the reporting or measurement resolution, then it is not clear if the road length is precisely measured as 45600 m or if it is a rough estimate. If it is the rough estimation, then only the first three non-zero digits are significant since the trailing zeros are neither reliable nor necessary; 45600 m can be expressed as 45.6 km or as 4.56 × 10
**An exact number has an infinite number of significant figures.**- If the number of apples in a bag is 4 (exact number), then this number is 4.0000... (with infinite trailing zeros to the right of the decimal point). As a result, 4 does not impact the number of significant figures or digits in the result of calculations with it.

**A mathematical or physical constant has significant figures to its known digits.***π*, as the ratio of the circumference to the diameter of a circle, is 3.14159265358979323... to 50 trillion digits^{[5]}calculated as of 2020-01-29, so the number of significant figures of*π*is that amount.- The Planck constant is and is defined as an exact value so that it is more properly defined as .
^{[6]}

### Ways to denote significant figures in an integer with trailing zeros[edit]

The significance of trailing zeros in a number not containing a decimal point can be ambiguous. For example, it may not always be clear if the number 1300 is precise to the nearest unit (just happens coincidentally to be an exact multiple of a hundred) or if it is only shown to the nearest hundreds due to rounding or uncertainty. Many conventions exist to address this issue. However, these are not universally used and would only be effective if the reader is familiar with the convention:

- Less often, using a closely related convention, the last significant figure of a number may be underlined; for example, "1300" has two significant figures.

- A decimal point may be placed after the number; for example "1300." indicates specifically that trailing zeros are meant to be significant.
^{[7]}

- A decimal point may be placed after the number; for example "1300." indicates specifically that trailing zeros are meant to be significant.

As the conventions above are not in general use, the following more widely recognized options are available for indicating the significance of number with trailing zeros:

- Eliminate ambiguous or non-significant zeros by changing the unit prefix in a number with a unit of measurement. For example, the precision of measurement specified as 1300 g is ambiguous, while if stated as 1.30 kg it is not. Likewise 0.0123 L can be rewritten as 12.3 mL

- Eliminate ambiguous or non-significant zeros by using Scientific Notation: For example, 1300 with three significant figures becomes 1.30×10
^{3}. Likewise 0.0123 can be rewritten as 1.23×10^{−2}. The part of the representation that contains the significant figures (1.30 or 1.23) is known as the significand or mantissa. The digits in the base and exponent (10^{3}or 10^{−2}) are considered exact numbers so for these digits, significant figures are irrelevant.

- Eliminate ambiguous or non-significant zeros by using Scientific Notation: For example, 1300 with three significant figures becomes 1.30×10

- Explicitly state the number of significant figures (the abbreviation s.f. is sometimes used): For example "20 000 to 2 s.f." or "20 000 (2 sf)".

- State the expected variability (precision) explicitly with a plus–minus sign, as in 20 000 ± 1%. This also allows specifying a range of precision in-between powers of ten.

## Rounding to significant figures[edit]

Rounding to significant figures is a more general-purpose technique than rounding to *n* digits, since it handles numbers of different scales in a uniform way. For example, the population of a city might only be known to the nearest thousand and be stated as 52,000, while the population of a country might only be known to the nearest million and be stated as 52,000,000. The former might be in error by hundreds, and the latter might be in error by hundreds of thousands, but both have two significant figures (5 and 2). This reflects the fact that the significance of the error is the same in both cases, relative to the size of the quantity being measured.

To round a number to *n* significant figures:^{[8]}^{[9]}

- If the
*n*+ 1 digit is greater than 5 or is 5 followed by other non-zero digits, add 1 to the*n*digit. For example, if we want to round 1.2459 to 3 significant figures, then this step results in 1.25. - If the
*n*+ 1 digit is 5 not followed by other digits or followed by only zeros, then rounding requires a tie-breaking rule. For example, to round 1.25 to 2 significant figures:- Round half away from zero (also known as "5/4")
^{[citation needed]}rounds up to 1.3. This is the default rounding method implied in many disciplines^{[citation needed]}if the required rounding method is not specified. - Round half to even, which rounds to the nearest even number. With this method, 1.25 is rounded down to 1.2. If this method applies to 1.35, then it is rounded up to 1.4. This is the method preferred by many scientific disciplines, because, for example, it avoids skewing the average value of a long list of values upwards.

- Round half away from zero (also known as "5/4")
- For an integer in rounding, replace the digits after the
*n*digit with zeros. For example, if 1254 is rounded to 2 significant figures, then 5 and 4 are replaced to 0 so that it will be 1300. For a number with the decimal point in rounding, remove the digits after the*n*digit. For example, if 14.895 is rounded to 3 significant figures, then the digits after 8 are removed so that it will be 14.9.

In financial calculations, a number is often rounded to a given number of places. For example, to two places after the decimal separator for many world currencies. This is done because greater precision is immaterial, and usually it is not possible to settle a debt of less than the smallest currency unit.

In UK personal tax returns, income is rounded down to the nearest pound, whilst tax paid is calculated to the nearest penny.

As an illustration, the decimal quantity **12.345** can be expressed with various numbers of significant digits or decimal places. If insufficient precision is available then the number is rounded in some manner to fit the available precision. The following table shows the results for various total precision at two rounding ways (N/A stands for Not Applicable).

Precision | Rounded to significant figures |
Rounded to decimal places |
---|---|---|

6 | 12.3450 | 12.345000 |

5 | 12.345 | 12.34500 |

4 | 12.34 or 12.35 | 12.3450 |

3 | 12.3 | 12.345 |

2 | 12 | 12.34 or 12.35 |

1 | 10 | 12.3 |

0 | N/A | 12 |

Another example for **0.012345**. (Remember that the leading zeros are not significant.)

Precision | Rounded to significant figures |
Rounded to decimal places |
---|---|---|

7 | 0.01234500 | 0.0123450 |

6 | 0.0123450 | 0.012345 |

5 | 0.012345 | 0.01234 or 0.01235 |

4 | 0.01234 or 0.01235 | 0.0123 |

3 | 0.0123 | 0.012 |

2 | 0.012 | 0.01 |

1 | 0.01 | 0.0 |

0 | N/A | 0 |

The representation of a non-zero number *x* to a precision of *p* significant digits has a numerical value that is given by the formula:^{[citation needed]}

- where

which may need to be written with a specific marking as detailed above to specify the number of significant trailing zeros.

## Writing uncertainty and implied uncertainty[edit]

### Significant figures in writing uncertainty[edit]

It is recommended for a measurement result to include the measurement uncertainty such as , where *x _{best}* and

*σ*are the best estimate and uncertainty in the measurement respectively.

_{x}^{[10]}

*x*can be the average of measured values and

_{best}*σ*can be the standard deviation or a multiple of the measurement deviation. The rules to write are:

_{x}^{[11]}

*σ*has only one or two significant figures as more precise uncertainty has no meaning._{x}- 1.79 ± 0.06 (correct), 1.79 ± 0.96 (correct), 1.79 ± 1.96 (incorrect).

- The digit positions of the last significant figures in
*x*and_{best}*σ*are the same, otherwise the consistency is lost. For example, in 1.79 ± 0.067 (incorrect), it does not make sense to have more accurate uncertainty than the best estimate. 1.79 ± 0.9 (incorrect) also does not make sense since the rounding guideline for addition and subtraction below tells that the edges of the true value range are 2.7 and 0.9, that are less accurate than the best estimate._{x}- 1.79 ± 0.06 (correct), 1.79 ± 0.96 (correct), 1.79 ± 0.067 (incorrect), 1.79 ± 0.9 (incorrect).

### Implied uncertainty[edit]

In chemistry (and may also be for other scientific branches), uncertainty may be implied by the last significant figure if it is not explicitly expressed.^{[2]} The implied uncertainty is ± the half of the minimum scale at the last significant figure position. For example, if the volume of water in a bottle is reported as 3.78 L without mentioning uncertainty, then ± 0.005 L measurement uncertainty may be implied. If 2.97 ± 0.07 kg, so the actual weight is somewhere in 2.90 to 3.04 kg, is measured and it is desired to report it with a single number, then 3.0 kg is the best number to report since its implied uncertainty ± 0.05 kg tells the weight range of 2.95 to 3.05 kg that is close to the measurement range. If 2.97 ± 0.09 kg, then 3.0 kg is still the best since, if 3 kg is reported then its implied uncertainty ± 0.5 tells the range of 2.5 to 3.5 kg that is too wide in comparison with the measurement range.

If there is a need to write the implied uncertainty of a number, then it can be written as with stating it as the implied uncertainty (to prevent readers from recognizing it as the measurement uncertainty), where *x* and *σ _{x}* are the number with an extra zero digit (to follow the rules to write uncertainty above) and the implied uncertainty of it respectively. For example, 6 kg with the implied uncertainty ± 0.5 kg can be stated as 6.0 ± 0.5 kg.

## Arithmetic[edit]

As there are rules to determine the significant figures in directly *measured* quantities, there are also guidelines (not rules) to determine the significant figures in quantities *calculated* from these *measured* quantities.

Significant figures in *measured* quantities are most important in the determination of significant figures in *calculated quantities* with them. A mathematical or physical constant (e.g., π in the formula for the area of a circle with radius *r* as π*r*^{2}) has no effect on the determination of the significant figures in the result of a calculation with it if its known digits are equal to or more than the significant figures in the measured quantities used in the calculation. An exact number such as ½ in the formula for the kinetic energy of a mass *m* with velocity *v* as ½*mv*^{2} has no bearing on the significant figures in the calculated kinetic energy since its number of significant figures is infinite (0.500000...).

The guidelines described below are intended to avoid a calculation result more precise than the measured quantities, but it does not ensure the resulted implied uncertainty close enough to the measured uncertainties. This problem can be seen in unit conversion. If the guidelines give the implied uncertainty too far from the measured ones, then it may be needed to decide significant digits that give comparable uncertainty.

### Multiplication and division[edit]

For quantities created from measured quantities via **multiplication** and **division**, the calculated result should have as many significant figures as the *least* number of significant figures among the measured quantities used in the calculation.^{[12]} For example,

- 1.234 × 2 = 2.468 ≈ 2
- 1.234 × 2.0 = 2.468 ≈ 2.5
- 0.01234 × 2 = 0.02468 ≈ 0.02

with *one*, *two*, and *one* significant figures respectively. (2 here is assumed not an exact number.) For the first example, the first multiplication factor has four significant figures and the second has one significant figure. The factor with the fewest or least significant figures is the second one with only one, so the final calculated result should also have one significant figure.

#### Exception[edit]

For unit conversion, the implied uncertainty of the result can be unsatisfactorily higher than that in the previous unit if this rounding guideline is followed; For example, 8 inch has the implied uncertainty of ± 0.5 inch = ± 1.27 cm. If it is converted to the centimetre scale and the rounding guideline for multiplication and division is followed, then 20.32 cm ≈ 20 cm with the implied uncertainty of ± 5 cm. If this implied uncertainty is considered as too underestimated, then more proper significant digits in the unit conversion result may be 20.32 cm ≈ 20. cm with the implied uncertainty of ± 0.5 cm.

Another exception of applying the above rounding guideline is to multiply a number by an integer, such as 1.234 × 9. If the above guideline is followed, then the result is rounded as 1.234 × 9.000.... = 11.106 ≈ 11.11. However, this multiplication is essentially adding 1.234 to itself 9 times such as 1.234 + 1.234 + ... + 1.234 so the rounding guideline for addition and subtraction described below is more proper rounding approach.^{[13]} As a result, the final answer is 1.234 + 1.234 + ... + 1.234 = 11.106 = 11.106 (one significant digit increase).

### Addition and subtraction[edit]

For quantities created from measured quantities via **addition** and **subtraction**, the last significant figure position (e.g., hundreds, tens, ones, tenths, hundredths, and so forth) in the calculated result should be the same as the *leftmost* or largest digit position among the last significant figures of the *measured* quantities in the calculation. For example,

- 1.234 + 2 = 3.234 ≈ 3
- 1.234 + 2.0 = 3.234 ≈ 3.2
- 0.01234 + 2 = 2.01234 ≈ 2

with the last significant figures in the *ones* place, *tenths* place, and *ones* place respectively. (2 here is assumed not an exact number.) For the first example, the first term has its last significant figure in the thousandths place and the second term has its last significant figure in the *ones* place. The leftmost or largest digit position among the last significant figures of these terms is the ones place, so the calculated result should also have its last significant figure in the ones place.

The rule to calculate significant figures for multiplication and division are not the same as the rule for addition and subtraction. For multiplication and division, only the total number of significant figures in each of the factors in the calculation matters; the digit position of the last significant figure in each factor is irrelevant. For addition and subtraction, only the digit position of the last significant figure in each of the terms in the calculation matters; the total number of significant figures in each term is irrelevant.^{[citation needed]} However, greater accuracy will often be obtained if some non-significant digits are maintained in intermediate results which are used in subsequent calculations.^{[citation needed]}

### Logarithm and antilogarithm

The base 10 logarithm of a normalized number (i.e., *a* × 10^{b} with 1 ≤ *a* < 10 and *b* as an integer), is rounded such that its decimal part (called mantissa) has as many significant figures as the significant figures in the normalized number.

- log
_{10}(3.000 × 10^{4}) = log_{10}(10^{4}) + log_{10}(3.000) = 4.000000... (exact number so infinite significant digits) + 0.4771212547... = 4.4771212547 ≈ 4.4771.

When taking the antilogarithm of a normalized number, the result is rounded to have as many significant figures as the significant figures in the decimal part of the number to be antiloged.

- 10
^{4.4771}= 29998.5318119... = 30000 = 3.000 × 10^{4}.

### Transcendental functions[edit]

If a transcendental function (e.g., the exponential function, the logarithm, and the trigonometric functions) is differentiable at its domain element *x*, then its number of significant figures (denoted as "significant figures of ") is approximately related with the number of significant figures in *x* (denoted as "significant figures of *x*") by the formula

,

where is the condition number. See Significance arithmetic to find its derivation.

### Round only on the final calculation result[edit]

When performing multiple stage calculations, do not round intermediate stage calculation results; keep as many digits as is practical (at least one more digit than the rounding rule allows per stage) until the end of all the calculations to avoid cumulative rounding errors while tracking or recording the significant figures in each intermediate result. Then, round the final result, for example, to the fewest number of significant figures (for multiplication or division) or leftmost last significant digit position (for addition or subtraction) among the inputs in the final calculation.^{[14]}

- (2.3494 + 1.345) × 1.2 = 3.6944 × 1.2 = 4.43328 ≈ 4.4.
- (2.3494 × 1.345) + 1.2 = 3.159943 + 1.2 = 4.359943 ≈ 4.4.

## Estimating an extra digit[edit]

When using a ruler, initially use the smallest mark as the first estimated digit. For example, if a ruler's smallest mark is 0.1 cm, and 4.5 cm is read, then it is 4.5 (±0.1 cm) or 4.4 – 4.6 cm as to the smallest mark interval. However, in practice a measurement can usually be estimated by eye to closer than the interval between the ruler's smallest mark, e.g. in the above case it might be estimated as between 4.51 cm and 4.53 cm.

It is also possible that the overall length of a ruler may not be accurate to the degree of the smallest mark, and the marks may be imperfectly spaced within each unit. However assuming a normal good quality ruler, it should be possible to estimate tenths between the nearest two marks to achieve an extra decimal place of accuracy.^{[15]} Failing to do this adds the error in reading the ruler to any error in the calibration of the ruler.^{[16]}

## Estimation in statistic[edit]

When estimating the proportion of individuals carrying some particular characteristic in a population, from a random sample of that population, the number of significant figures should not exceed the maximum precision allowed by that sample size.

## Relationship to accuracy and precision in measurement[edit]

Traditionally, in various technical fields, "accuracy" refers to the closeness of a given measurement to its true value; "precision" refers to the stability of that measurement when repeated many times. Hoping to reflect the way in which the term "accuracy" is actually used in the scientific community, there is a recent standard, ISO 5725, which keeps the same definition of precision but defines the term "trueness" as the closeness of a given measurement to its true value and uses the term "accuracy" as the combination of trueness and precision. (See the Accuracy and precision article for a full discussion.) In either case, the number of significant figures roughly corresponds to *precision*, not to accuracy or the newer concept of trueness.

## In computing[edit]

Computer representations of floating-point numbers use a form of rounding to significant figures, in general with binary numbers. The number of correct significant figures is closely related to the notion of relative error (which has the advantage of being a more accurate measure of precision, and is independent of the radix, also known as the base, of the number system used).

## See also[edit]

- Benford's Law (First Digit Law)
- Engineering notation
- Error bar
- False precision
- IEEE754 (IEEE floating point standard)
- Interval arithmetic
- Kahan summation algorithm
- Precision (computer science)
- Round-off error

## References[edit]

**^**"Significant Figures - Writing Numbers to Reflect Precision".*Chemistry - Libretexts*. 2019-09-04.- ^
^{a}^{b}Lower, Stephen (2021-03-31). "Significant Figures and Rounding".*Chemistry - LibreTexts*. **^***Chemistry in the Community*; Kendall-Hunt:Dubuque, IA 1988**^**Giving a precise definition for the number of correct significant digits is surprisingly subtle, see Higham, Nicholas (2002).*Accuracy and Stability of Numerical Algorithms*(PDF) (2nd ed.). SIAM. pp. 3–5.**^**Most accurate value of pi**^**"Resolutions of the 26th CGPM" (PDF).*BIPM*. 2018-11-16. Archived from the original (PDF) on 2018-11-19. Retrieved 2018-11-20.**^**Myers, R. Thomas; Oldham, Keith B.; Tocci, Salvatore (2000).*Chemistry*. Austin, Texas: Holt Rinehart Winston. p. 59. ISBN 0-03-052002-9.**^**Engelbrecht, Nancy; et al. (1990). "Rounding Decimal Numbers to a Designated Precision" (PDF). Washington, D.C.: U.S. Department of Education.**^**Numerical Mathematics and Computing, by Cheney and Kincaid.**^**Luna, Eduardo. "Uncertainties and Significant Figures" (PDF).*DeAnza College*.**^**"Significant Figures".*Purdue University - Department of Physics and Astronomy*.**^**"Significant Figure Rules". Penn State University.**^**"Uncertainty in Measurement- Significant Figures".*Chemistry - LibreTexts*. 2017-06-16.**^**de Oliveira Sannibale, Virgínio (2001). "Measurements and Significant Figures (Draft)" (PDF).*Freshman Physics Laboratory*. California Institute of Technology, Physics Mathematics And Astronomy Division. Archived from the original (PDF) on 2013-06-18.**^***Experimental Electrical Testing*. Newark, NJ: Weston Electrical Instruments Co. 1914. p. 9. Retrieved 2019-01-14.Experimental Electrical Testing..

**^**"Measurements".*slc.umd.umich.edu*. University of Michigan. Retrieved 2017-07-03.